Blimpie_B
Adel Wiggins Flexible Connectors

New Prices effective 01/01/08

Burns Stainless

1013 W. 18th St. Costa Mesa, Ca 92627

949-631-5120
 fax 949-631-3184

7:30 am to 4 pm

Monday - Friday
Pacific Time

Adel Wiggins Flexible Tube Connectors, known familiarly as Wiggins Clamps, provide an ideal method for connecting and sealing two tubes.

They are available in aluminum with a stainless two-finger latch, and are frequently used for vacuum lines, water lines, and turbo intake plumbing.

All are qualified to AS1650 and MIL-C-22263 specs., and are tested to greater than 125 psi. operating pressure, at temperatures up to 450° F depending mainly on the o-ring material.

Wiggins Clamps are remarkably easy to use. Once the Weld Ferrules are welded to the tubes to be connected and the O-rings are installed, the O-ring Sleeve is slipped over the Weld Ferrules and the Clamshell Clamp snaps into place - you can do it with two fingers - providing a flexible sealed connection.

A Wiggins Coupling Assembly (not including the O-rings) is comprised of four pieces:

  • The Clamshell Assembly - the clamshell clamp and the hard anodized O-ring sleeve
  • Two Weld Ferrules, which have O-ring grooves and are usually butt-welded to your tube.

Listed below are complete coupling assemblies, clamshell assemblies, and weld ferrules.
We don't stock O-rings, but standard AS568 O-rings are used.
You select the O-ring material that is appropriate to your application

Order Burns Stainless Online
Click on Part Number to Add to Your Order
Wiggins Clamp Assembly
O.D. Wt. lbs Part Number Each
1/2" .05 W991-8DE-050-A 77.39  
5/8" .06 W991-10DE-063-A 81.06  
3/4" .08 W991-12DE-075-A 94.26  
1" .10 W991-16DE-100-A 108.68  
1-1/4" .11 W991-20DE-125-A 109.01  
1-1/2" .13 W991-24DE-150-A 134.84  
1-3/4" .15 W991-28DE-175-A 142.39  
2" .18 W991-32DE-200-A 158.04  
2-1/2" .21 W991-40DE-250-A 182.90  
3" .28 W991-48DE-300-A 208.17  
3-1/2" .34 W991-56DE-350-A 313.61  
4" .39 W991-64DE-400-A 402.99  


Order Burns Stainless Online
Click on Part Number to Add to Your Order
Wiggins Clamp
O.D. Wt. lbs Part Number Each
1/2" .03 W991-8DE-050 48.44  
5/8" .04 W991-10DE-063 49.27  
3/4" .04 W991-12DE-075 48.64  
1" .05 W991-16DE-100 55.53  
1-1/4" .06 W991-20DE-125 55.86  
1-1/2" .06 W991-24DE-150 56.92  
1-3/4" .07 W991-28DE-175 63.49  
2" .08 W991-32DE-200 68.18  
2-1/2" .10 W991-40DE-250 84.28  
3" .14 W991-48DE-300 102.99  
3-1/2" .18 W991-56DE-350 185.41  
4" .20 W991-64DE-400 249.52  


Order Burns Stainless Online
Click on Part Number to Add to Your Order
Wiggins Ferrule
O.D. Wt. lbs Part Number Each
1/2" .01 W903B8D-050 14.48  
5/8" .01 W903B10D-063 15.90  
3/4" .02 W903B12D-075 22.81  
1" .02 W903B16D-100 26.57  
1-1/4" .03 W903B20D-125 26.57  
1-1/2" .03 W903B24D-150 38.96  
1-3/4" .04 W903B28D-175 39.45  
2" .05 W903B32D-200 44.93  
2-1/2" .06 W903B40D-250 49.31  
3" .07 W903B48D-300 52.59  
3-1/2" .08 W903B56D-350 64.10  
4" .09 W903B64D-400 76.73  


While Burns Stainless does not supply
O-rings
, Wiggins Clamps use industry standard O-rings, defined by the SAE.
In the reference table below, the O-ring size code is AS568A followed by the dash number indicating the partĘs dimensions.

Tube

Use O-ring

Nominal

Nominal

OD

AS568A

Inside dia.

Cross section

1/2

-015

9/16

1/16

5/8

-017

11/16

1/16

3/4

-117

13/16

3/32

1

-214

1

1/8

1 1/4

-218

1 1/4

1/8

1 1/2

-222

1 1/2

1/8

1 3/4

-224

1 3/4

1/8

2

-226

2

1/8

2 1/2

-230

2 1/2

1/8

3

-234

3

1/8

3 1/2

-238

3 1/2

1/8

4

-242

4

1/8


Copyright © 2005-08     Burns Stainless LLC    All Rights Reserved